WeMush grow guide
King Trumpet · Grain spawn
Sterilized grain colonized by mycelium — the inoculum for bulk substrate or more grain.
- Species
- Pleurotus eryngii
- Also called
- King Oyster
General guidance — not yet reviewed. Conditions vary by strain and setup; adjust to how your culture performs.
When it arrives
- Check the bag: healthy spawn is white and spread through the grain, with no green, black or slimy patches and no sour smell.
- Keep it sealed. Don't open the bag or press on the filter patch until you're ready to use it.
- A little condensation inside the bag is normal.
- Store it out of direct sun at room temperature. Ask your vendor before refrigerating it; some species do not tolerate cold.
Next steps
- Ready spawn is white all through the grain. If you can still see uncolonized kernels, leave it sealed a few more days (break it up and shake it if the bag allows).
- Use within about 1–2 weeks of full colonization while the spawn is vigorous.
- Prepare the substrate before you open the spawn: hydrate it to field capacity (a firmly squeezed handful releases only a few drops), then sterilize or pasteurize it as that substrate requires.
- Spawn into supplemented hardwood sawdust or Masters Mix (hardwood sawdust + soy hulls) at 10–20% of wet substrate weight.
- Work in a clean, still-air space: break the spawn up inside its bag, mix it evenly through the substrate, and seal it in a filter-patch bag or container.

Scan for the online guide
https://wemush.com/guide/grow/king-trumpet?form=grain-spawn&unit=F
Sources
- Widely published general cultivation practice (grower handbooks, extension literature)
- Requires WeMush staff review before being presented as reviewed guidance
Let the substrate colonize somewhere dark at 68–75 °F (20–24 °C) for about 3–5 weeks.Cold shock: once the block is fully colonized, drop the temperature into the fruiting range and open the bag at the top.Fruit at 50–64 °F (10–18 °C) with 85–95% relative humidity.Steady fresh air exchange. Higher CO₂ lengthens stems and shrinks caps; lower CO₂ favours caps.Low, indirect light on a day/night cycle.Harvest before caps flatten or drop heavy spores.Between flushes, let the block rest and rehydrate if the species produces more than one flush.Good to know
- Fruits from the top surface of the block — open or cut the bag at the top rather than the sides.
- Sterilize supplemented sawdust; pasteurization is not enough for supplemented blocks.
- Avoid straw — lower yields; eryngii performs best on sterilized, supplemented sawdust.
- Avoid CVG (coir / vermiculite / gypsum) — too nutrient-poor for eryngii; a casing/fruiting mix for other species.
Growing conditions
- Colonization temperature
- 68–75 °F (20–24 °C)
- Colonization time
- About 3–5 weeks
- Fruiting temperature
- 50–64 °F (10–18 °C)
- Fruiting humidity
- 85–95% RH
- Spawn rate
- 10–20% of wet substrate weight
- Flushes
- Typically 1–2 flushes; the first flush carries most of the yield.
Timeline
- Substrate colonization: about 3–5 weeks at 68–75 °F (20–24 °C).
- First pins to harvest: about 2–4 weeks.
- Typically 1–2 flushes; the first flush carries most of the yield.
What to watch for
- Green mold (Trichoderma) on the block surface or between grains
- Wet, sour-smelling or slimy patches (bacterial blotch / wet spot)
- Colonization stalls well past the expected window with no new growth
- Dry, cracked or yellowing pins (humidity too low)
- Long stems with small caps (not enough fresh air)