WeMush grow guide
Pioppino · Grain spawn
Sterilized grain colonized by mycelium — the inoculum for bulk substrate or more grain.
- Species
- Agrocybe aegerita
- Also called
- Black Poplar Mushroom
General guidance — not yet reviewed. Conditions vary by strain and setup; adjust to how your culture performs.
When it arrives
- Check the bag: healthy spawn is white and spread through the grain, with no green, black or slimy patches and no sour smell.
- Keep it sealed. Don't open the bag or press on the filter patch until you're ready to use it.
- A little condensation inside the bag is normal.
- Store it out of direct sun at room temperature. Ask your vendor before refrigerating it; some species do not tolerate cold.
Next steps
- Ready spawn is white all through the grain. If you can still see uncolonized kernels, leave it sealed a few more days (break it up and shake it if the bag allows).
- Use promptly once fully colonized — vigor declines with storage.
- Prepare the substrate before you open the spawn: hydrate it to field capacity (a firmly squeezed handful releases only a few drops), then sterilize or pasteurize it as that substrate requires.
- Spawn into supplemented hardwood sawdust at 5–10% of wet substrate weight.
- Work in a clean, still-air space: break the spawn up inside its bag, mix it evenly through the substrate, and seal it in a filter-patch bag or container.
- Let the substrate colonize somewhere dark at 70–75 °F (21–24 °C) for about 3–4 weeks.

Scan for the online guide
https://wemush.com/guide/grow/pioppino?form=grain-spawn&unit=F
Sources
- La Mycosphère pioppino spawn (after Stamets, Growing Gourmet and Medicinal Mushrooms): incubation 21–27 °C for 3–4 weeks; pinning 15–20 °C, 95–100% RH; fruiting 85–95% RH; spawn 5–10% of wet substrate — https://lamycosphere.com/en/products/mycelium-de-piopinos
- North Spore pioppino grain spawn: fruiting 13–18 °C, 85–95% RH, 95–100% RH at pinning; high CO₂ gives long, stringy stems — https://northspore.com/products/pioppino-grain-spawn
- Rootlab sword belt (Agrocybe aegerita): incubation 21–24 °C, fruiting 17–21 °C, 85–90% RH — https://rootlab.com.au/mushroom-supplies/swordbelt-mushroom
- Requires WeMush staff review before being presented as reviewed guidance
Once fully colonized, open the top of the bag and keep the humidity very high (95% or more) at a slightly cooler temperature until pins form.Fruit at 59–70 °F (15–21 °C) with 85–95% relative humidity.Fresh air exchange matters: high CO₂ gives long, stringy stems and lower yields.Low, indirect light.Harvest before caps flatten or drop heavy spores.Between flushes, let the block rest and rehydrate if the species produces more than one flush.Good to know
- Pins abort easily if the humidity drops; keep it very high until they are well formed.
- Sterilize supplemented sawdust; pasteurization is not enough for supplemented blocks.
Growing conditions
- Colonization temperature
- 70–75 °F (21–24 °C)
- Colonization time
- About 3–4 weeks
- Fruiting temperature
- 59–70 °F (15–21 °C)
- Fruiting humidity
- 85–95% RH
- Spawn rate
- 5–10% of wet substrate weight
- Flushes
- Usually more than one flush; later flushes are smaller.
Timeline
- Substrate colonization: about 3–4 weeks at 70–75 °F (21–24 °C).
- First pins to harvest: about 11–22 days.
- Usually more than one flush; later flushes are smaller.
What to watch for
- Green mold (Trichoderma) on the block surface or between grains
- Wet, sour-smelling or slimy patches (bacterial contamination)
- Colonization stalls well past the expected window with no new growth
- Dry, cracked or yellowing pins (humidity too low)
- Long stems with small caps (not enough fresh air)