WeMush grow guide
Shiitake · Grain spawn
Sterilized grain colonized by mycelium — the inoculum for bulk substrate or more grain.
General guidance — not yet reviewed. Conditions vary by strain and setup; adjust to how your culture performs.
When it arrives
- Check the bag: healthy spawn is white and spread through the grain, with no green, black or slimy patches and no sour smell.
- Keep it sealed. Don't open the bag or press on the filter patch until you're ready to use it.
- A little condensation inside the bag is normal.
- Store it out of direct sun at room temperature. Ask your vendor before refrigerating it; some species do not tolerate cold.
Next steps
- Ready spawn is white all through the grain. If you can still see uncolonized kernels, leave it sealed a few more days (break it up and shake it if the bag allows).
- Use promptly once fully colonized — vigor declines with storage.
- Prepare the substrate before you open the spawn: hydrate it to field capacity (a firmly squeezed handful releases only a few drops), then sterilize or pasteurize it as that substrate requires.
- Spawn into supplemented hardwood sawdust (oak preferred) at 10–20% of wet substrate weight.
- Work in a clean, still-air space: break the spawn up inside its bag, mix it evenly through the substrate, and seal it in a filter-patch bag or container.
- Let the substrate colonize somewhere dark at 68–77 °F (20–25 °C) for about 6–17 weeks.

Scan for the online guide
https://wemush.com/guide/grow/shiitake?form=grain-spawn&unit=F
Sources
- Widely published general cultivation practice (grower handbooks, extension literature)
- Requires WeMush staff review before being presented as reviewed guidance
After the block has browned, remove the bag and soak or cold-shock it to initiate pinning.Fruit at 50–70 °F (10–21 °C) with 80–95% relative humidity.Good fresh air exchange.Indirect light on a day/night cycle.Harvest before caps flatten or drop heavy spores.Between flushes, let the block rest and rehydrate if the species produces more than one flush.Good to know
- Browning (a brown, bark-like outer layer) is normal and precedes fruiting.
- Avoid straw — shiitake is a wood decomposer.
Growing conditions
- Colonization temperature
- 68–77 °F (20–25 °C)
- Colonization time
- About 6–17 weeks
- Fruiting temperature
- 50–70 °F (10–21 °C)
- Fruiting humidity
- 80–95% RH
- Spawn rate
- 10–20% of wet substrate weight
- Flushes
- Often 2–4 flushes with a rest and re-soak between each.
Timeline
- Substrate colonization: about 6–17 weeks at 68–77 °F (20–25 °C).
- First pins to harvest: about 7–14 days.
- Often 2–4 flushes with a rest and re-soak between each.
What to watch for
- Green mold (Trichoderma), especially during the long browning period
- Wet, sour-smelling patches (bacterial contamination)
- Colonization stalls with no browning progress well past the expected window
- Dry, cracked or yellowing pins (humidity too low)
- Long stems with small caps (not enough fresh air)